to me looks like a right solution, even if I was also tired of writing for loops by hand usually
Dibby053 11 minutes ago [-]
Some of these are wrong, as standard shell globs don't traverse directories. For instance the first example should be:
ls **/*.sh
I think that would work in Bash just as well as using find.
But yeah, even in POSIX it feels redundant when we already have find, seq, grep and whatnot.
giov4 27 minutes ago [-]
On a second thought I think that the effort in trying to find a shell uncomfortability problem and trying to solve it with a "wrapped workaround" still represents positive effort and should be supported and fostered without jumping directly in 90's like rtfm mode.
especially in the case of a younger profile, learning and putting dev effort, even if vibed or redundant, its still effort and a learning activity!
so I support this even if the result and problem solving can be less significant
account42 4 hours ago [-]
> Consistent syntax — same {} placeholder for files, lines, ranges, or lists
Inconsistent syntax native bash methods so its an additional syntax to learn.
> Template mode — single-quoted commands work as shell templates: enumerate -f '*' -- 'cat {} | head -5'
Passing commands a a single string is BAD. Now you have to think about escaping and quoting. What does {} get replaced with if the enumerant contains unsafe characters? Can it be used as part of a larger argument or only on its own? Who knows, it's not bash. Compared to a bash loop its also always a subshell with all the implications that has - even find can be piped into a normal bash loop.
> Filters — --include and --exclude with glob patterns
A fraction of what find or native loops provide. And since this can't replace them in general enumerate is an additional thing to learn on top.
> Extensible — drop a file in lib/enumerators/ to add custom sources
To extend bash loops you don't even need root access, you just add the code to the loop.
iririririr 3 hours ago [-]
being consistent in a sea of inconsistency is a good thing, no matter how hard you try to paint otherwise. the solution have to start at some point. But the rest, yeah, scary.
zxexz 5 hours ago [-]
I don’t want to be a downer here, but the structure of this repo and the verbosity+language of the docs feel 80% vibecoded. Not that that’s wrong; I just feel kinda gullible for even clicking on this.
One uses xargs or parallel only a few times before they remember some of the quirks that but them. And then they become cautious. And then it’s muscle memory. And if it’s not an often occurrence, they learn to check the man page.
Anyways, in a world of “vibecoding” why add another “tool” to the mix when the LLMs have been trained on all our stackoverflow-posted grievances to begin with?
IdiotSavage 5 hours ago [-]
In this thread: bash experts with arcane knowledge, unintentionally demonstrating how awful bash is.
The obvious solution would be to use something more sane, like PowerShell or nushell, but instead old experts will always defend the skills they have honed for years, while criticizing anything that's different.
jltsiren 2 hours ago [-]
You could also say that English is an awful language, because the spelling and the pronunciation have diverged too far. But it's the international lingua franca in most contexts, because it's the international lingua franca in most contexts.
People use Bash as the default shell for scripting, because people use Bash as the default shell for scripting. If you want to replace it, you should pick a winner and discourage the use of alternatives, especially when they are better than Bash. So don't say "use something more sane, like PowerShell or nushell". Say something like "use PowerShell, or Bash if you really have to for legacy purposes, but never use nushell for any reason" instead.
kfsone 4 hours ago [-]
I was the kind of shell guru whose teeth itched when they saw someone doing `grep | awk`. Then I had to try and bring Windows into a Mac+Linux CI system under Jenkins groovy files that were full of `"""sh` fragments, shell scriptlets wrapping python, etc, etc, and I don't bat (I don't groovy either).
Option 1: Learn to bat and try to translate. Hmm. No. Just no
Option 2: ?
Pwsh core had just come out. My immediate thought was that it would be great material for an anti-MS-ragging blog post, but then a line leapt out at me from one article I was glossing over: "... POSIX Terminal Shell Spec ...".
I still wanted that anti-MS-ragging blog material, so I decided to try and use Pwsh as a Rosetta stone until I got to a point I could convert to a real language.
But things just began to click for me. It was like going from Perl to Python - suddenly everything is an object and you can interact with
everything* that way.
There's no need for grep or awk or sed in pwsh, because the output of a shell command is an object -- a string (or []byte). It has methods.
(netstat -an).replace("192.168.86.", "10.0.100.")
6 years later, pwsh is the default shell on my Mac, Ubuntu boxes, lab vms, ... everything but my docker containers unless I'm feeling feisty.
no-name-here 4 hours ago [-]
I’m curious why it’s your default on most but not all platforms?
iririririr 3 hours ago [-]
ideally containers run a single process. if you're spawning shells you're doing something wrong. and idealier, you should use just bare processes with namespaces and abandon docker.
amelius 4 hours ago [-]
Yes, Bash has no place in modern software engineering.
The only reasons people still use it are historical and laziness.
If it was invented today, professionals would cringe at it.
lobofta 4 hours ago [-]
Switched to Nushell and I am not looking back. I don't see any major reason why we should keep dragging Bash into the twenty first century. Nushell is the first time I feel like I can write complex systems operations in a shell without having to spend either a ton of time in the docs or being at the mercy of an LLM. It is godsend.
piaste 2 hours ago [-]
I tried to switch to nushell full-time but couldn't stick with it.
Ironically, the main friction point were not old-fashioned tools (which `from ssv` usually handled nicely) but the 'new generation' of core CLI tools like eza or fzf. They have really nice visualizations, but they do not output structured data as a middle step, so all the colours and lines only play havoc with nu's parsing.
Since I need to "ls" a lot more often than I need to do data manipulation, the tools won and I went back to zsh. Still keep nu around for the occasional config/data file wrangling though.
dundarious 5 hours ago [-]
If you want a shell to interact with the results, you can of course just use a (sub)shell.
ls -1 ./*.sh | xargs -rd\\n sh -c 'for i in "$@" ; do ... ; done' sh
1. not strictly necessary to use -1 as I believe all common ls detect !isatty(stdout) and produce line-by-line output anyway.
2. xargs -r just doesn't run the command if there's no input, also not strictly necessary but I'm addicted to using it because it's the sensible default to me.
3. xargs -d\\n makes it collect fields as full lines, which is what you typically want, unless you're able to generate NULs.
4. use whatever shell you want of course, but I don't use bashisms, etc., by default, /bin/sh is fine for me, even if it's dash.
5. the trailing "sh" at the end is due to a quirk of `sh -c` usage, where $0 is the first non option argument, so `printf %s\\n 1 2 3 | xargs -rd\\n sh -c 'for i in "$@" ; do printf "%s " "$i" ; done ; echo'` (note the lack of trailing "sh") would only print "2 3 " as $0 is not included in "$@" ($0 is 1, $1 is 2, $2 is 3). It's very easy to just always give the shell name itself manually as $0 instead of trying to ingest "$0" into your logic.
Of course, you could `find . -maxdepth 1 -type f -name '*.sh' -print0 | xargs -r0 ...` instead, depending on what you're up to, that may be the easiest. It's definitely the simplest -- as long as your xargs has -0 support.
dspillett 1 hours ago [-]
> not strictly necessary to use -1 as I believe all common ls detect !isatty(stdout)
I remember, though from the dim an distant past so it could be a long-fixed bug, this not working in at least one circumstance. I've explicitly included -1 in scripted calls to ls since. Of course we are breaking the best practice rule of not trying to parse the output of ls, so problems are not unexpected…
As a generally thing I like to include directives like this in scripted calls even if they happen by default anyway, because is makes my intent clear: I expect the output to being in simple single-column format and the rest will break if it isn't. I even sometimes go as far as specifying --sort=name if nothing else in the pipeline is going to enforce that.
> as long as your xargs has -0 support
I don't think I've encountered an xargs that doesn't have this support for a long time, though I don't work with embedded stuff so maybe there are cut-down versions out there still in active use for space reasons.
The problem I've hit numerous times is wanting to do something between “find -print0” and “xargs -0” and that something not supporting NUL as the item delimiter.
eqvinox 13 hours ago [-]
Not sure I see the point of this. Remembering a bunch of options on one tool is no better than a bunch of tools/constructs? Especially if the latter are useful elsewhere. And it can't be used for scripts unless you start shipping it alongside, which… nah.
Just go with
foo | while read X; do bar "$X"; done
xorcist 10 hours ago [-]
Bash while loops are pretty readable and the above would be a nice to iterate over lines if it wasn't for that gnarly pipe, which is a common source of errors in this construct. Remember that a pipe starts a new shell. So:
grep stuff file.txt | while read key value ; do [ "$key" = "target" ] && found="$value" ; done
where you might expect $found to end up with the value for the line that has "target" in the first column. Then you notice that darn pipe symbol. The variable found is set in a subshell that terminates and the value is lost. This is a problem every time you need to keep some sort of state when looping. If you can tolate a bash-ism then you could do:
while read key value ; do [ "$key" = "target" ] && found="$value" ; done < <(grep stuff file.txt)
but that doesn't read as nice and isn't compatible. It does avoid a common source of problems though, and might be worth getting into muscle memory for the times it is needed.
eqvinox 6 hours ago [-]
You can put the "< <( foo )" before the "while" btw, for pipe-like ordering of things. All redirections can be anywhere on the command line.
dylan604 9 hours ago [-]
> and isn't compatible
is that a GNU v POSIX type of compatibility issue?
eqvinox 6 hours ago [-]
bash vs. POSIX sh (or some other shells)
zsh should be bash compatible on this AFAIR
t43562 5 hours ago [-]
While FTW! I just wondered whether it could be simplified because I get a bit tired of typing out my own belt and braces version of it:
{ # code that generates one item/filename per line of output } | { while read ITEM; do # do something with "$ITEM"; done; }
So I just tried this and it seems to work for a trivial case although you need 1 escape:
enum() {
local source=$1; shift; local action=$1; shift
{ eval "$source" ; } | { while read ITEM; do eval "$action"; done; }
}
$ enum "find /tmp" "echo found: \$ITEM"
found: /tmp/.XIM-unix
found: /tmp/.ICE-unix
JoshTriplett 11 hours ago [-]
I use "| while read" as well, because it works well in a pipeline and handles embedded spaces. It doesn't handle embedded newlines, but in practice, real files have embedded spaces, while embedded newlines only happen in test cases and exploits. (You can do actual NUL-delimited reads with `-d ''`, but for a quick command-line operation that's generally not necessary, and if you're going to be that careful you probably also need `-r`.)
laughing_man 10 hours ago [-]
Depending on the actual command, this can be far slower and less efficient than xargs. You're creating a separate process for each invocation of bar when a lot of commands will take many targets for a single invocation.
Try this with find and grep vs xargs. There's a big difference.
eqvinox 6 hours ago [-]
3 reasons against that:
* in a lot of cases the performance just doesn't matter
* xargs gets you the spaces in filenames landmine
* some commands don't even support multiple target filename arguments
For scripts in long term use, yeah, sure, figure out xargs maybe. Any other situation with a "| while read" solution, especially on an interactive session, is an oddball and simplicity wins.
laughing_man 5 hours ago [-]
xargs supports null termination.
While it's true not every command supports multiple targets, presumably you know if you're using one of those commands.
fiddlerwoaroof 11 hours ago [-]
I just use while’s default variable name, $REPLY most of the time. But `while` is my preferred tool for the xargs problem in most cases.
db48x 8 hours ago [-]
> Or maybe you pipe into xargs and pray your filenames don’t have spaces…
Always use -0. Most gnu utilities support it. It makes them put a null byte after every filename instead of a newline. Completely eliminates the problem of dealing with whitespace in the filenames.
AdieuToLogic 8 hours ago [-]
To support your recommendation and redress the strawman the article postulates, the post's author could have replaced:
find . -name '*.log' | xargs rm
With:
find . -name '*.log' -print0 | xargs -0 rm
jsrcout 3 hours ago [-]
For tools that don't support -0, you can add the NULs yourself without much fuss. It's a one-liner in awk/perl/sed. Very handy.
ykonstant 1 hours ago [-]
If you do not have -0 options in your xargs/find, I wonder if you will have those extensions in your awk/sed. Perl is a different story.
tester457 13 hours ago [-]
On the topic of xargs replacements, I love gnu parallel.
The --dry-run flag of parallel made me confident to do more batch processing than I ever did with xargs.
Parallel has an option for almost everything, it's almost too much.
But I have shopped around for alternatives.
The creator Ole Tange maintains a painstakingly long article of the alternatives and their differences. [0]
The gnu parallel book and reading materials [1] are excellent too.
I have used echo as a sort of poor mans equivalent for a safe check of a pipeline, removing the echo when I felt the rest of the pipeline was working correctly.
shell stuff | xargs -n 1 -I % echo real command and % args
I have also been known to write scripts where instead of executing the critical parts it prints them. Then a dry run is
script
and the real run is
script | sh
krackers 10 hours ago [-]
Shouldn't you use echo instead of cat?
somat 10 hours ago [-]
yes echo, total brain fart there. corrected.
bryancoxwell 11 hours ago [-]
Love that idea, thanks for sharing
metadat 11 hours ago [-]
Every time I’ve used Gnu Parallel on a new system it required accepting a Eula, which is annoying. I stick to xargs -P99 these days and am happier.
Utility software which has non-essential different first-run behavior is hostile to users.
dataflow 12 hours ago [-]
Oh man, parallel is awful. I have to rant about this because I literally tried it again today morning.
Every single damn time I try parallel and decide to give it another chance, something ends up not working or causing a problem. I can never get it to just do what I want and get out of the way.
Today I foolishly thought maybe I was the one who was holding it wrong every single time in the past, so I copy pasted another command that was supposed to work, and thought surely this would be straightforward. Boy was I wrong. I got some manifesto about academic citations and plagiarism, which confused the hell out of me. After I wasted time trying to figure out how to turn off that nonsense, the app just hung there trying to figure out how long its command line can be? Literally doing nothing? What the hell? I killed it but then my terminal didn't close because every time I did this apparently some perl command was spawned in the background blocked on nothing. Why the hell was perl even relevant? Nothing I wrote used Perl. Just run the darn commands I asked in parallel, is that so hard?
brokenmachine 5 hours ago [-]
I'm not new to command line tools, but I somehow managed to delete ~10k pictures while trying to use parallel to resize them.
I forget the details but it was some kind of surprisingly weird foot-gun behavior.
Luckily I had a backup, but it really has made me scared to try using parallel again.
nvme0n1p1 11 hours ago [-]
> the app just hung there trying to figure out how long its command line can be?
That's common on linux. Many tools read from stdin if a file path isn't given: cat, xargs, base64, cksum, etc.
The citation thing is a little silly, I'll give you that one.
dataflow 6 hours ago [-]
> That's common on linux. Many tools read from stdin if a file path isn't given: cat, xargs, base64, cksum, etc.
No. I did pipe to stdin. It's not my first time using Linux...
Here's a command line I ran right now, and the output I see:
$ echo "http://www.example.com" | parallel -k -j 8 curl -s "{}"
Academic tradition requires you to cite works you base your article on.
[...more nonsense...]
To silence this citation notice: run 'parallel --citation' once.
parallel: Warning: Finding the maximal command line length. This may take up to 1 minute.
So I wait a few seconds... until I get fed up and look at my process list, and I see perl is just... seemingly sitting there, doing seemingly absolutely nothing. I'm not going to waste a whole minute of my life waiting for this; I see no reason competently written software should take that long just to accomplish such a simple task where nothing is remotely close to reaching any limits.
So I Ctrl+C. And then the parent perl process gets killed, but the child apparently keeps running.
I press Ctrl+D to exit the terminal, and then:
$ # (Ctrl+D pressed)
logout
...it just sits there waiting. Ctrl+C and Ctrl+\ do nothing. I have to kill the lingering perl process manually.
xargs Just Works without any of this nonsense, yet somehow I'm the one holding GNU parallel wrong?
darrenf 5 hours ago [-]
> parallel: Warning: Finding the maximal command line length. This may take up to 1 minute.
> So I wait a few seconds [snip]
This warning is only ever printed if running in Cygwin, not Linux or macOS or elsewhere. Cygwin is notoriously slow.
# This is slow on Cygwin, so give Cygwin users a warning
if($^O eq "cygwin" or $^O eq "msys") {
::warning("Finding the maximal command line length. ".
"This may take up to 1 minute.")
}
Also note that it only figures this out first time, after which it’s cached on disk.
dataflow 3 hours ago [-]
This is on MSYS2, yes, and that excuses absolutely nothing, because this shouldn't be happening in the first place for speed to be even relevant. At the risk of repeating myself thrice: the messages are confusing, the Ctrl+C handling is just utterly broken, the citation message adds to the confusion while being frankly obnoxious, and all of the delays and outputs are unnecessary in the first place as proven by literally every other program that doesn't make me wait a minute before I can use it the first time, including xargs. If Microsoft's own Windows tools did this, everybody would bash them (no pun intended) till the end of time. But since it's GNU Parallel and not Microsoft Parallel, it's Windows's fault for being slow and also my fault for having the audacity to expect better, apparently.
4 hours ago [-]
11 hours ago [-]
fn-mote 10 hours ago [-]
> Today I foolishly thought maybe I was the one who was holding it wrong […]
Apparently goes on to describe being confused about parallel reading from the standard input?
The rush project page on Github itself says it is only "slightly" faster.
jeffbee 8 hours ago [-]
Modesty, I suppose. The larger your machine is, the more obviously faster it is.
5 hours ago [-]
pjmlp 5 hours ago [-]
One thing with classical UNIX commands, is that you can expect to find them into random computers besides one's own laptop.
Not everyone has the luxury to only work with their own computer, or run random software on IT/customer managed systems.
ykonstant 2 hours ago [-]
This is why I tend to stick to POSIX shell scripting these days, avoiding even bash. The restriction does make some things too painful, though. Before the latest POSIX revision, certain workflows were comically hard to do (unless you combine sh with... M4). The 2024 revision injects some much-needed sanity, but I am wondering, will random computers have shells compliant with that revision?
pjmlp 58 minutes ago [-]
Back in the day, as I mentioned around a few times, I found refuge in XEmacs, coming from the comfy Borland IDEs world.
However, I also had to get comfortable enough with vi, because most customer systems that we would be required to access on a support visit, or remotely, only had ed and vi available.
Even if we nowadays stick with Linux distros instead of UNIX in general, there is still the issue of what is there by default.
Yep POSIX shell scripting can be a bit painful, which is why knowing a bit awk, perl and sed might help as well, as they tend to be available by default.
tom_ 28 minutes ago [-]
I never liked xargs either. My replacement is kind of like "xargs -n 1 -d '\n' -J '{}'", which experience has taught me is almost always what I want. It consumes all of its input before starting, so it knows how many files it has to process, and it can print progress to stderr and/or the terminal title as it goes. It can run each command via the shell if you want. It has --dry-run and --keep-going. It can read the file names from a file rather than stdin. I have a few more ideas for things it could do, but I haven't needed to add them yet.
(For enumerating files, I use find or dir/b/s, possibly combined with grep, then pipe the result in.)
People moaning about avoiding non-basic use of xargs and bash (and inadvertently demonstrating in many cases why some of us think that xargs sucks) miss a large part of the point, which is that it's nice to have a tool that does exactly what you want, and works in a way that's convenient for you, and isn't so widely used that you have to worry about modifying it. If you find the tool doesn't work the way you like, you can just change it. You don't have to be answerable to anybody else. I think tptacek's quite good essay could be relevant: https://sockpuppet.org/blog/2026/05/12/emacsification/
(You don't have to use LLMs for this! I wrote my program by hand, it's only like 250 lines of Python, and you could write one too. But, whichever barriers to entry prevent you from creating your own tools for yourself, using an LLM would probably lower at least some of them.)
Xargs is fine, but openbsd has a -J option and every time I read the man page to figure out how to use it I read the -I and -J options and my brain glazes over.
The two arg cd is pretty useful (and, zsh implements it too because cd is a shell feature): if you have parallel directory structure (e.g. the way rails does tests) you can switch from app/b/c/d to spec/b/c/f by doing `cd app spec`
In a world with nix and where nearly every system has zsh, restricting yourself to the POSIX version of these tools is masochistic.
JoshTriplett 11 hours ago [-]
I highly recommend using whatever capabilities are convenient of any utility you're running, and not caring about what other systems do unless you're actually trying to write a portable shell script.
ggm 12 hours ago [-]
BSD vs linux with a standards committee inbetween.
koolba 13 hours ago [-]
And for most of those commands add a dash dash so that nothing with a dash prefix turns into options.
13 hours ago [-]
em-bee 12 hours ago [-]
why would you ever pipe find into xargs instead of calling -exec?
find -exec the '{}' iterated command ';'
gumby 12 hours ago [-]
Because xargs is faster. Exec will invoke the command once per matching file (which is sometimes what you want, of course)!
While xargs will accumulate a bunch of file names, then when it as n names will invoke the command with those names, while continuing to accumulate names until n is reached or the pipe closes.
The size of n depends on the system, but is usually at least a thousand.
em-bee 12 hours ago [-]
the example as given does not accumulate, so that is what i worked with.
find -exec command '{}' '+'
accumulates file arguments too. the only advantage of xargs is that you can tell it how many arguments to accumulate,̶ ̶t̶h̶e̶ ̶d̶o̶w̶n̶s̶i̶d̶e̶ ̶o̶f̶ ̶x̶a̶r̶g̶s̶ ̶i̶s̶ ̶t̶h̶a̶t̶ ̶y̶o̶u̶ ̶h̶a̶v̶e̶ ̶t̶o̶ ̶s̶p̶e̶c̶i̶f̶y̶ ̶t̶h̶e̶ ̶n̶u̶m̶b̶e̶r̶,̶ ̶w̶h̶e̶r̶e̶a̶s̶ ̶f̶i̶n̶d̶ ̶j̶u̶s̶t̶ ̶f̶i̶t̶s̶ ̶a̶s̶ ̶m̶a̶n̶y̶ ̶a̶s̶ ̶i̶t̶ ̶c̶a̶n̶.̶
xorcist 10 hours ago [-]
The problem with find is that you can't specify the maximum tolerated command line lengths, and find hasn't historically been very smart about it (it just had a compiled-in value). Apparently this is fixed in GNU find, but for older systems and other platforms that may still be an issue.
Another feature missing in find that xargs has is the maximum processes to start at a time. find will run the commands in sequence, but in many situations you really want to run a bunch in parallel.
em-bee 10 hours ago [-]
good points that i wasn't aware of, thank you. though personally i rarely start huge operations that need to be parallelized so i prefer simplicity over speed.
unsnap_biceps 11 hours ago [-]
xargs will fit as many as it can in 128 KiB or the system limit, which is smaller, so in practice, it's almost always pretty similar default packing
em-bee 10 hours ago [-]
you are right, i forgot to check the default. fixed my comment.
ggm 12 hours ago [-]
The prior has a point because 98.89% of the time I type xargs -n 1 -0 and we are deep in the useless pipe argument which Rob Pike amongst others has rehearsed well.
I do it because I do it, just like why I use egrep and sed in pipes along with awk.
t-3 11 hours ago [-]
Leah Neukirchen's lr and xe are very nice as a find and xargs replacement (although lr's test flag is way too complex). lr *.file | xe -s ' ... ' is a really great pattern for iterative scripting and hard to get wrong.
kfsone 4 hours ago [-]
Careful - you start from the POSIX terminal spec, you think maybe it would be interesting having objects instead of raw text streams, and next thing you've reinvented powershell...
(*35 years living and loving sh/ksh/bash/dash etc, only tried pwsh so I could write some comparisons and slag off MS a bit; now it's my default shell on everything)
teo_zero 9 hours ago [-]
Good idea but strange syntax. It would be more idiomatic if the command came first and the list of globs last.
Additionally the use of "--" is not what everybody expects: here it is used to introduce one argument, the command, while it's usually meant to introduce multiple arguments without worrying if they have a leading "-".
A possible revised syntax with command as the first argument followed by a list of globs optionally introduced by "--" would allow to enumerate all files with a leading "-", which the current syntax cannot:
enumerate 'whatever {}' -- '-*'
I'm assuming "-f" for simplicity, but the same reasoning holds for "-L" too.
montag 8 hours ago [-]
I thought -- was typically a separator for passing a list of arguments directly to some subcommand
altairprime 5 hours ago [-]
The historical meaning is, "do not interpret command line arguments following --"; e.g. the classical form shown by `echo > -f; rm -- -f`. Git has a more complex interpretation of it and no doubt there's others, but this root interpretation remains generally sound: It acts as a boundary between 'complex and intelligent processing of @ARGV elements' and 'every remaining element of @ARGV after -- is treated a string literal without further processing'.
jllyhill 3 hours ago [-]
Did you write it or did Claude code slopcoded it for you? Claude is the contributor to all your other repositories. There is a world of difference between "here's a problem that I'm really concerned with and poured all my expertise to solve it" and "I told Claude to fix it for me and now I'm gonna abandon it as soon as I'm done with the HN advertising".
> There is a world of difference between "here's a problem that I'm really concerned with and poured all my expertise to solve it" and "I told Claude to fix it for me and now I'm gonna abandon it as soon as I'm done with the HN advertising"
For this simple example (derived from the article), find also has a delete operator.
This null termination is now a POSIX standard.
ivlad 11 hours ago [-]
Was exactly my thought: why not to use null termination?
Looks like a case where reading man page would have spared writing another copycat utility.
rmunn 9 hours ago [-]
And null termination is guaranteed to work, because the only two characters forbidden in Unix filenames (for most varieties of Unix, I won't guarantee there aren't some weird variants out there) are / and null.
The only times I've needed something more than `find -print0 | xargs -0` has been when I need to apply logic to decide whether to process one of the files, in a way that's not easy to express in a `find` command. Then I write a small script with a for loop and if statements inside it.
But more people should know about `-print0`. It's the answer to 95% of the problems with `find | xargs`.
Walf 10 hours ago [-]
Yeah, and I invariably add -r to xargs, so as not to execute the command unless results come through the pipeline.
If one is working with whole lines of text, setting the delimiter to newline is often desirable:
xargs -d \\n
5 hours ago [-]
vladde 3 hours ago [-]
i often find xargs ends up biting me, and i have wanted some alternative for a while... but i don't think this is the one for me.
it feel like the syntax here is odd. it still requires me to write quote my command i want to run? unfortunately i'll have to pass on this.
personally i'd want some variant where i can still auto-complete commands and have just have {} as a placeholder. (maybe time to learn how to use xargs for real?)
G_o_D 7 hours ago [-]
Atleast follow standard practice in your example
Fails : enumerate -f '.txt' -- 'wc -l {}'
For all use cases
Correct : enumerate -f '
.txt' -- 'wc -l -- {}'
gfalcao 8 hours ago [-]
> Or maybe you pipe into xargs and pray your filenames don’t have spaces…
Most of this, if not all, is fixable by adding a `export IFS=$'\n'` to your bashrc. I'm not trying to disregard your project, just point out something that took me years to learn and I currently use extensively to solve this very problem. Perhaps you didn't know about it until now... :)
ykonstant 1 hours ago [-]
Try not to do that in an uncontrolled file system. Filenames can and will have newlines, including trailing newlines, because evil people like myself inject them everywhere in our local user folders to keep sysadmins on their toes. Use the (now, finally, POSIX) -0/-print0 options for all file parsing which produces the correct behavior on all UNIX systems.
ivlad 5 hours ago [-]
Or, you use `xargs -0` for null termination instead of white space termination. `find` conveniently supports `-print0` that will use null character as separator.
gfalcao 6 hours ago [-]
Another trick that took me years to learn is to use `xargs -I` to split the results into "items"
I have found that the most reliable way I like is to just construct the command externally and then pass to gnu parallel (mostly for --eta and --tmuxpane). And the great thing is, as others say, xargs -I. I prefer for shortness (and few collisoins), '@'
I know the echo is a little silly but then I can remove the |parallel and see if it's right. And if I don't want parallelism, I just pass to bash
samtheprogram 12 hours ago [-]
Literally just use xargs with -I {} and quotation marks?
laughing_man 10 hours ago [-]
That won't save you from weird file names, but null termination will.
samtheprogram 9 hours ago [-]
Passing "{}" handles most sane cases including spaces. If I'm doing bash that needs to be robust (rare and/or dotfiles) or know the folder/dataset has weird filenames, sure.
0xbadcafebee 12 hours ago [-]
I wanted something simpler — one consistent way to iterate over anything.
That's not actually simpler though. Simple is removing everything unnecessary. You took commands which could already do what you wanted, and added an extra program which calls them in specific ways. This will add bugs and maintenance headaches, not be portable, etc. This is added complexity.
The reason you made this script is not because you wanted simpler, you wanted easier. There's nothing wrong with that, and I'll grant you it probably is, especially for those unaccustomed to these commands. But easier != simpler. Often you'll find that simple is hard and easy is complexity deferred.
montag 7 hours ago [-]
Hm. Underrated comment
scrame 5 hours ago [-]
find -print0...|xargs -0...
works for me, and i don't always want to execute something and xargs can run parallel processes. i feel like this guy never bothered to read the man page.
raggi 12 hours ago [-]
in zsh you can just write:
for x (*.sh); echo "before $x after"
or
for x in *.sh; echo "before $x after"
or
for x (*.sh) { echo -n "before "; echo -n $x; echo " after" }
PunchyHamster 11 hours ago [-]
missed the point. reason to use xargs or parallel are generally two: list of arguments is too long, or list of arguments that is kept in memory would take too much
for example
for a in `find / ` ; do echo $a ; done
will take A LOT of memory, while using find's -exec, xargs, or parallel will not
raggi 5 hours ago [-]
In my experience once you get to the point where you run out of space in the glob you’re often suffering with poor performance from spawning children as well and it’s time to move to a more formal program even if it’s a script, writing out work plans and completions to list files to avoid wasted time. It’s often a great guardrail to remind you to do this
unsnap_biceps 11 hours ago [-]
I looked into the source and the underlaying source uses a glob and suffers from the issue you brought up.
But bashenumerate doesn't do that? The parent is saying you should zsh shortloops instead of bashenumerate not zsh shortloops instead of xargs.
9 hours ago [-]
zombot 12 minutes ago [-]
> and pray your filenames don’t have spaces
`find` has `-print0` and `xargs` has the matching `-0` flag for this. So this specific argument makes me doubt the author knows their tools. Stopped reading at this point.
fhn 7 hours ago [-]
calling it 'bashnumerate' and then have the command be 'enumerate' is confusing. find one and stick with it.
AdieuToLogic 8 hours ago [-]
> Ever found yourself writing this?
for f in *.txt; do
wc -l "$f"
done
No, because `wc` accepts multiple files. And the example given is incorrect for any file having a `.txt` suffix and whitespaces.
> Or this?
find . -name '*.sh' -exec wc -l {} +
No.
> These all work, but each has its own syntax, its own flags, its own quirks. I wanted something simpler — one consistent way to iterate over anything.
And therein lies the proverbial xkcd standards[0] proof.
along with: I love standards- Theres soany to choose from!
dboreham 8 hours ago [-]
55 comments and nobody mentioned the incorrect English in the title?
fhn 6 hours ago [-]
I'm glad you here to save us. What would we do without you?
PunchyHamster 11 hours ago [-]
I feel like it could be just alias to some particular GNU Parallel set of options
wallach-game 15 hours ago [-]
bashumerate — iterate over files, lines, ranges, or lists with a consistent {} syntax. No for loops, no find -exec, no xargs flags to remember.
enumerate -f '*.sh' -- wc -l {}
enumerate -L a b c -- 'echo {}'
Under 150 lines of bash, pluable sources, NUL-safe.
https://github.com/wallach-game/bashumerate
https://github.com/wallach-game/bashumerate/pull/1/files
to me looks like a right solution, even if I was also tired of writing for loops by hand usually
But yeah, even in POSIX it feels redundant when we already have find, seq, grep and whatnot.
especially in the case of a younger profile, learning and putting dev effort, even if vibed or redundant, its still effort and a learning activity!
https://github.com/wallach-game
so I support this even if the result and problem solving can be less significant
Inconsistent syntax native bash methods so its an additional syntax to learn.
> Template mode — single-quoted commands work as shell templates: enumerate -f '*' -- 'cat {} | head -5'
Passing commands a a single string is BAD. Now you have to think about escaping and quoting. What does {} get replaced with if the enumerant contains unsafe characters? Can it be used as part of a larger argument or only on its own? Who knows, it's not bash. Compared to a bash loop its also always a subshell with all the implications that has - even find can be piped into a normal bash loop.
> Filters — --include and --exclude with glob patterns
A fraction of what find or native loops provide. And since this can't replace them in general enumerate is an additional thing to learn on top.
> Extensible — drop a file in lib/enumerators/ to add custom sources
To extend bash loops you don't even need root access, you just add the code to the loop.
One uses xargs or parallel only a few times before they remember some of the quirks that but them. And then they become cautious. And then it’s muscle memory. And if it’s not an often occurrence, they learn to check the man page.
Anyways, in a world of “vibecoding” why add another “tool” to the mix when the LLMs have been trained on all our stackoverflow-posted grievances to begin with?
The obvious solution would be to use something more sane, like PowerShell or nushell, but instead old experts will always defend the skills they have honed for years, while criticizing anything that's different.
People use Bash as the default shell for scripting, because people use Bash as the default shell for scripting. If you want to replace it, you should pick a winner and discourage the use of alternatives, especially when they are better than Bash. So don't say "use something more sane, like PowerShell or nushell". Say something like "use PowerShell, or Bash if you really have to for legacy purposes, but never use nushell for any reason" instead.
Option 1: Learn to bat and try to translate. Hmm. No. Just no Option 2: ?
Pwsh core had just come out. My immediate thought was that it would be great material for an anti-MS-ragging blog post, but then a line leapt out at me from one article I was glossing over: "... POSIX Terminal Shell Spec ...".
I still wanted that anti-MS-ragging blog material, so I decided to try and use Pwsh as a Rosetta stone until I got to a point I could convert to a real language.
But things just began to click for me. It was like going from Perl to Python - suddenly everything is an object and you can interact with
everything* that way.There's no need for grep or awk or sed in pwsh, because the output of a shell command is an object -- a string (or []byte). It has methods.
(netstat -an).replace("192.168.86.", "10.0.100.")
6 years later, pwsh is the default shell on my Mac, Ubuntu boxes, lab vms, ... everything but my docker containers unless I'm feeling feisty.
The only reasons people still use it are historical and laziness.
If it was invented today, professionals would cringe at it.
Ironically, the main friction point were not old-fashioned tools (which `from ssv` usually handled nicely) but the 'new generation' of core CLI tools like eza or fzf. They have really nice visualizations, but they do not output structured data as a middle step, so all the colours and lines only play havoc with nu's parsing.
Since I need to "ls" a lot more often than I need to do data manipulation, the tools won and I went back to zsh. Still keep nu around for the occasional config/data file wrangling though.
2. xargs -r just doesn't run the command if there's no input, also not strictly necessary but I'm addicted to using it because it's the sensible default to me.
3. xargs -d\\n makes it collect fields as full lines, which is what you typically want, unless you're able to generate NULs.
4. use whatever shell you want of course, but I don't use bashisms, etc., by default, /bin/sh is fine for me, even if it's dash.
5. the trailing "sh" at the end is due to a quirk of `sh -c` usage, where $0 is the first non option argument, so `printf %s\\n 1 2 3 | xargs -rd\\n sh -c 'for i in "$@" ; do printf "%s " "$i" ; done ; echo'` (note the lack of trailing "sh") would only print "2 3 " as $0 is not included in "$@" ($0 is 1, $1 is 2, $2 is 3). It's very easy to just always give the shell name itself manually as $0 instead of trying to ingest "$0" into your logic.
Of course, you could `find . -maxdepth 1 -type f -name '*.sh' -print0 | xargs -r0 ...` instead, depending on what you're up to, that may be the easiest. It's definitely the simplest -- as long as your xargs has -0 support.
I remember, though from the dim an distant past so it could be a long-fixed bug, this not working in at least one circumstance. I've explicitly included -1 in scripted calls to ls since. Of course we are breaking the best practice rule of not trying to parse the output of ls, so problems are not unexpected…
As a generally thing I like to include directives like this in scripted calls even if they happen by default anyway, because is makes my intent clear: I expect the output to being in simple single-column format and the rest will break if it isn't. I even sometimes go as far as specifying --sort=name if nothing else in the pipeline is going to enforce that.
> as long as your xargs has -0 support
I don't think I've encountered an xargs that doesn't have this support for a long time, though I don't work with embedded stuff so maybe there are cut-down versions out there still in active use for space reasons.
The problem I've hit numerous times is wanting to do something between “find -print0” and “xargs -0” and that something not supporting NUL as the item delimiter.
Just go with
is that a GNU v POSIX type of compatibility issue?
zsh should be bash compatible on this AFAIR
Try this with find and grep vs xargs. There's a big difference.
* in a lot of cases the performance just doesn't matter
* xargs gets you the spaces in filenames landmine
* some commands don't even support multiple target filename arguments
For scripts in long term use, yeah, sure, figure out xargs maybe. Any other situation with a "| while read" solution, especially on an interactive session, is an oddball and simplicity wins.
While it's true not every command supports multiple targets, presumably you know if you're using one of those commands.
Always use -0. Most gnu utilities support it. It makes them put a null byte after every filename instead of a newline. Completely eliminates the problem of dealing with whitespace in the filenames.
The --dry-run flag of parallel made me confident to do more batch processing than I ever did with xargs.
Parallel has an option for almost everything, it's almost too much.
But I have shopped around for alternatives. The creator Ole Tange maintains a painstakingly long article of the alternatives and their differences. [0]
The gnu parallel book and reading materials [1] are excellent too.
[0] https://www.gnu.org/software/parallel/parallel_alternatives....
[1] https://www.gnu.org/software/parallel/#Tutorial
Utility software which has non-essential different first-run behavior is hostile to users.
Every single damn time I try parallel and decide to give it another chance, something ends up not working or causing a problem. I can never get it to just do what I want and get out of the way.
Today I foolishly thought maybe I was the one who was holding it wrong every single time in the past, so I copy pasted another command that was supposed to work, and thought surely this would be straightforward. Boy was I wrong. I got some manifesto about academic citations and plagiarism, which confused the hell out of me. After I wasted time trying to figure out how to turn off that nonsense, the app just hung there trying to figure out how long its command line can be? Literally doing nothing? What the hell? I killed it but then my terminal didn't close because every time I did this apparently some perl command was spawned in the background blocked on nothing. Why the hell was perl even relevant? Nothing I wrote used Perl. Just run the darn commands I asked in parallel, is that so hard?
I forget the details but it was some kind of surprisingly weird foot-gun behavior.
Luckily I had a backup, but it really has made me scared to try using parallel again.
That's common on linux. Many tools read from stdin if a file path isn't given: cat, xargs, base64, cksum, etc.
The citation thing is a little silly, I'll give you that one.
No. I did pipe to stdin. It's not my first time using Linux...
Here's a command line I ran right now, and the output I see:
So I wait a few seconds... until I get fed up and look at my process list, and I see perl is just... seemingly sitting there, doing seemingly absolutely nothing. I'm not going to waste a whole minute of my life waiting for this; I see no reason competently written software should take that long just to accomplish such a simple task where nothing is remotely close to reaching any limits.So I Ctrl+C. And then the parent perl process gets killed, but the child apparently keeps running.
I press Ctrl+D to exit the terminal, and then:
...it just sits there waiting. Ctrl+C and Ctrl+\ do nothing. I have to kill the lingering perl process manually.xargs Just Works without any of this nonsense, yet somehow I'm the one holding GNU parallel wrong?
> So I wait a few seconds [snip]
This warning is only ever printed if running in Cygwin, not Linux or macOS or elsewhere. Cygwin is notoriously slow.
Also note that it only figures this out first time, after which it’s cached on disk.Apparently goes on to describe being confused about parallel reading from the standard input?
parallel is written in perl.
https://github.com/shenwei356/rush
Not everyone has the luxury to only work with their own computer, or run random software on IT/customer managed systems.
However, I also had to get comfortable enough with vi, because most customer systems that we would be required to access on a support visit, or remotely, only had ed and vi available.
Even if we nowadays stick with Linux distros instead of UNIX in general, there is still the issue of what is there by default.
Yep POSIX shell scripting can be a bit painful, which is why knowing a bit awk, perl and sed might help as well, as they tend to be available by default.
(For enumerating files, I use find or dir/b/s, possibly combined with grep, then pipe the result in.)
People moaning about avoiding non-basic use of xargs and bash (and inadvertently demonstrating in many cases why some of us think that xargs sucks) miss a large part of the point, which is that it's nice to have a tool that does exactly what you want, and works in a way that's convenient for you, and isn't so widely used that you have to worry about modifying it. If you find the tool doesn't work the way you like, you can just change it. You don't have to be answerable to anybody else. I think tptacek's quite good essay could be relevant: https://sockpuppet.org/blog/2026/05/12/emacsification/
(You don't have to use LLMs for this! I wrote my program by hand, it's only like 250 lines of Python, and you could write one too. But, whichever barriers to entry prevent you from creating your own tools for yourself, using an LLM would probably lower at least some of them.)
https://man.openbsd.org/xargs
Other brain glazing obsd wierdness is it's two argument cd command, a cryptid I am unable to wrap my head around.
https://man.openbsd.org/ksh#cd~2
While xargs will accumulate a bunch of file names, then when it as n names will invoke the command with those names, while continuing to accumulate names until n is reached or the pipe closes.
The size of n depends on the system, but is usually at least a thousand.
Another feature missing in find that xargs has is the maximum processes to start at a time. find will run the commands in sequence, but in many situations you really want to run a bunch in parallel.
I do it because I do it, just like why I use egrep and sed in pipes along with awk.
(*35 years living and loving sh/ksh/bash/dash etc, only tried pwsh so I could write some comparisons and slag off MS a bit; now it's my default shell on everything)
Additionally the use of "--" is not what everybody expects: here it is used to introduce one argument, the command, while it's usually meant to introduce multiple arguments without worrying if they have a leading "-".
A possible revised syntax with command as the first argument followed by a list of globs optionally introduced by "--" would allow to enumerate all files with a leading "-", which the current syntax cannot:
I'm assuming "-f" for simplicity, but the same reasoning holds for "-L" too.https://en.wikipedia.org/wiki/False_dilemma
This null termination is now a POSIX standard.
Looks like a case where reading man page would have spared writing another copycat utility.
The only times I've needed something more than `find -print0 | xargs -0` has been when I need to apply logic to decide whether to process one of the files, in a way that's not easy to express in a `find` command. Then I write a small script with a for loop and if statements inside it.
But more people should know about `-print0`. It's the answer to 95% of the problems with `find | xargs`.
If one is working with whole lines of text, setting the delimiter to newline is often desirable:
xargs -d \\n
it feel like the syntax here is odd. it still requires me to write quote my command i want to run? unfortunately i'll have to pass on this.
personally i'd want some variant where i can still auto-complete commands and have just have {} as a placeholder. (maybe time to learn how to use xargs for real?)
Fails : enumerate -f '.txt' -- 'wc -l {}'
For all use cases
Correct : enumerate -f '
.txt' -- 'wc -l -- {}'Most of this, if not all, is fixable by adding a `export IFS=$'\n'` to your bashrc. I'm not trying to disregard your project, just point out something that took me years to learn and I currently use extensively to solve this very problem. Perhaps you didn't know about it until now... :)
For example
`ps aux | grep process-name | grep -v grep | awk '{ print $2 }' | xargs -Ieach kill -9 each`
seq 1 10|xargs -I@ echo 'bash run.py @'|parallel -j 10
I know the echo is a little silly but then I can remove the |parallel and see if it's right. And if I don't want parallelism, I just pass to bash
That's not actually simpler though. Simple is removing everything unnecessary. You took commands which could already do what you wanted, and added an extra program which calls them in specific ways. This will add bugs and maintenance headaches, not be portable, etc. This is added complexity.
The reason you made this script is not because you wanted simpler, you wanted easier. There's nothing wrong with that, and I'll grant you it probably is, especially for those unaccustomed to these commands. But easier != simpler. Often you'll find that simple is hard and easy is complexity deferred.
for example
will take A LOT of memory, while using find's -exec, xargs, or parallel will nothttps://github.com/wallach-game/bashumerate/blob/master/lib/...
`find` has `-print0` and `xargs` has the matching `-0` flag for this. So this specific argument makes me doubt the author knows their tools. Stopped reading at this point.
> Or this?
No.> These all work, but each has its own syntax, its own flags, its own quirks. I wanted something simpler — one consistent way to iterate over anything.
And therein lies the proverbial xkcd standards[0] proof.
0 - https://xkcd.com/927/